在盘上进行如下操作(命令行模式):
然后用xcopy命令轻松将U盘变成Vista安装盘(D:为源盘,E:为U盘)
- diskpart
- select disk 1
- clean
- create partition primary
- select partition 1
- active
- format fs=fat32
- assign
- exit
xcopy d:*.* /s/e/f e:全部搞定,剩下来就是用USB2.0闪盘启动机器即可.
查看:HOWTO: Install Windows Vista from a high speed USB 2.0 Flash Drive