redsn0w Lite For iPod touch 2代 - cnBeta.COM 移动版(WAP)

新闻来源:威锋网
非整合限制版iPod Touch 2G 越狱(非正式版)

_____________________________________________
-->给iPod越狱很可能会使你失去保修权利<--
风险自担。
我们不会承担任何因这个软件引起的任何形式的对你的设备的损伤。
-->风险自担<--
_____________________________________________
我们绝对不会支持这种行为！！！！！
如果你在我们的博客上发布寻求支持的留言，我们保留禁止你的博客用户ID的权利。你真的不需要做这个除非你清楚的明白这个不需要支持。
_____________________________________________

这是一个受限制版的越狱
如果你不知道受限制的含义，不要使用它！

做这个的方法很多。下面的方法可能会对你起作用。如果没作用，请不要来寻求支持，我们正在制作一个不受限制的版本。

此版本仅适用于Mac系统。但是你应该可以找到方法（或者自己做一个）让他在Windows和Linux上运行。

____________________________________________

rslite
____________________________________________
这个是通向设备DFU和恢复模式的界面。他要求你的mac上安装了librickrb。
由于bug在librickrb和苹果的设备之间的干扰，何较长的输出都会被破坏。但是如果你只用“！”和“#”符号，你将可以绕开这些限制。我们不仅仅是使用这个工具，但是他要比我们使用的GUI更容易分配和编译。

“！”（感叹号，使用时没有引号）送出一个文件。
“#”（警号，使用时没有引号）送出一个文本。
在两种情况下，你要紧接着在符号后命名文件。

___________________________________________

基础教程
___________________________________________
注意：这些仅仅是基本指导。请别来找我们寻求细节指导。

准备
1）把目录FirmwareBundles和CustomPackages考到你的 PwnageTool.app/Contents/Resources 目录下
2）使用PwnageTool在Advanced模式下制作一个自制固件 2.2.1ipsw。不要把logos设为自定义启动。
3）从你的2.2.1ipsw里解压出这些（打了包的）文件：
   iBSS.n72ap.RELEASE.dfu (命名为 iBSS221pwn.dfu)
   iBoot.n72ap.RELEASE.img3  (命名为 iBoot221pwn.img3)
4）从官方2.2.1ipsw里解压出这个（没打包的）文件：
   iBSS.n72ap.RELEASE.dfu (命名为 iBSS211.dfu)

安装越狱自制固件ipsw

5）把你的iPod Touch 2G用按键调成DFU模式，别让iTunes启动！
6）开始rslite。把官方的iBSS从2.1.1送出：!iBSS211.dfu
7）再次开始rslite。把redsn0w-lite包送出：#pwn211ibss.txt
8）从2.2.1送出打了包的iBSS：!iBSS221pwn.dfu
9）用你的自制固件2.2.1ipsw使用iTunes做一个完全恢复

受限制的启动
在安装完毕后，你的ipt2g得在一部相应的电脑的辅助下才能启动。在这个readme.txt里提到的方法要求你进入DFU模式，但是你应该能找到（或者自己做出）别的更方便的方法。
10）重复步骤5-8
11）从2.2.1送出打了包的iBoot：!iBoot221pwn.img3

你的壁纸将会很快显现。然后你就可以打开iTunes了。

原文：
redsn0w lite
by the iPhone Dev Team

http://blog.iphone-dev.org

A no frills tethered jailbreak for iPod Touch 2G

-----------------------------------------------------------------------------
--> YOU WILL VERY LIKELY VOID YOUR WARRANTY BY USING THIS <--

This is to be used only at your own risk.

We do not accept any responsibility for any damage that this tool may help
you cause to any of your equipment.

--> USE AT YOUR OWN RISK!!!!! <--
-----------------------------------------------------------------------------

WE WILL BE PROVIDING ABSOLUTELY NO SUPPORT FOR THIS!!!!!
If you post comments on our blog looking for support, we reserve the
right to ban your user ID from the blog.  You really shouldn't be doing
this unless you understand it all enough to not need support!

-----------------------------------------------------------------------------

THIS IS A *****  TETHERED ***** JAILBREAK
IF YOU DON'T KNOW EXACTLY WHAT THAT MEANS, DON'T USE THIS!

There are many ways to do this.  Here's one way that will probably
work for you.  If it doesn't, please don't come to use for support.
We're working on an untethered version.

This is for Mac only.  But you should be able to find (or work out
on your own) how to do it on Windows or Linux too.

-----------------------------------------------------------------------------
rslite
-----------------------------------------------------------------------------
This is an interface to the DFU and Recovery modes of the device.  It
requires you to have librickrb installed on your Mac.

Due to buggy interaction between librickrb and the Apple device, any output
that is long gets all chewed up.  But if you stick to just the "!" and
the "#" commands, you won't notice.  We don't normally use this tool
but it's a lot easier to distribute and compile than the GUI we use.

The "!" (exclamation point, no quotes when you use it) sends a file.
The "#" (pound sign, no quotes when you use it) sends a script.
In both cases, you name the file right after the symbol.

-----------------------------------------------------------------------------
Basic instructions
-----------------------------------------------------------------------------
Note: these are the bare bones instructions. Please don't come to us
looking for more detailed instructions.

Preparation
1) Copy the FirmwareBundles and CustomPackages directories into
your PwnageTool.app/Contents/Resources directory
2) Create a custom 2.2.1 ipsw with PwnageTool in Advanced mode.  Don't
enable custom boot logos.
3) From your custom 2.2.1 ipsw, extract these (patched) files:
iBSS.n72ap.RELEASE.dfu (name it iBSS221pwn.dfu)
iBoot.n72ap.RELEASE.img3  (name it iBoot221pwn.img3)
4) From the official 2.1.1 ipsw, extract this (unpatched) file:
iBSS.n72ap.RELEASE.dfu (name it iBSS211.dfu)

Installing the jailbroken custom ipsw
5) Put your ipt2g into DFU mode using keypresses.  Don't have iTunes running!
6) Start rslite.  Send the official iBSS from 2.1.1: !iBSS211.dfu
7) Start rslite again.  Send the redsn0w-lite patch: #pwn211ibss.txt
8) Send the patched iBSS from 2.2.1:                   !iBSS221pwn.dfu
9) Use iTunes to do a full restore using your custom 2.2.1 ipsw

Tethered boot
After the install, your ipt2g will not be bootable without assistance
from a tethered computer.  The method in this README.txt requires you
to go into DFU mode, but you should be able to find (or work out on
your own) other more convenient ways.
10) Repeat steps 5-8
11) Send the patched iBoot from 2.2.1:                !iBoot221pwn.img3

Your homescreen should soon show up.  You can then start iTunes.

工具下载地址：
http://attachments.weiphone.com/attachment.php?aid=286451&k=733922a74e7ef383782fb0ca8c4cae04&t=1233413305